• 65mm(2.5 in) aluminum edgewound voice coil 600W program power handling..
• 96 dB SPL 1W/ 1m average sensitivity.
• High excursion design for low frequency clarity and punch..
• Weather protected cone and coated plates for outdoor.
• Ultra lightweight design Suitable for line array applications and multiway systems..

• Imported from USA (Sizes & Specifications are based on the USA Market).

Description The 8NW650 is a 8 inch neodymium woofer. The
transducer has been developed in response to a specific market
requirement for a light weight design that combines excellent
linearity with high power handling capabilities. The 8NW650 is
primarily intended for use as a low frequency driver for
line-arrays as well as high quality 2-way or multiway reflex
enclosuresplate and the magnet faceplate and carefully designed
ventilation ducts made into the metal back plate. The curvilinear
paper cone is formed using a special high strength wood pulp,
designed to achieve the best possible rigidity and stiffness. The
ability to perform in humid environments is an extra key feature
of the 8NW650. This is achieved trough the application of an
exclusively developed membrane treatment which renders the cone
humidity repellent while does not increasing the total moving
speaker mass. In addition, a special epoxy treatment is applied
to the top and back plates making the transducer far more
resistant to the corrosive effects of salts and oxidization. Key
Features : General Specifications: Nominal Diameter 200mm(8 in)
Rated Impedance 8 Ohm AES Power 300W Program Power 600W Peak
Power 1200W Sensitivity 96 dB Frequency Range 55 ÷ 6300 Hz Max
Recomm.Frequency 2500 Hz Recomm. Enclosure Volume 10 ÷ 40 lt.
(0.36 ÷ 1.41 cuft) Minimum Impedance 6,3 Ohm at 25°C. Max Peak To
Peak Excursion 26mm(1.02 in) Voice Coil Diameter 65mm(2.5 in)
Voice Coil Winding Material Edgewound aluminum